- #AIRPLAY APP FOR MAC AIR PARROT INSTALL#
- #AIRPLAY APP FOR MAC AIR PARROT SOFTWARE#
- #AIRPLAY APP FOR MAC AIR PARROT PASSWORD#
Select it, then click Continue.Īt the next step, give it a name (you can keep the default if you wish), a description (this is how your printer will be identified to your iDevice) and a location (optional). Find yours in the list – it should show up however it is connected (either by USB or over your network). Once you’re logged in, you should be given a list of currently connected printers.
#AIRPLAY APP FOR MAC AIR PARROT PASSWORD#
You’ll then be prompted to log in – just use your normal Pi credentials (username is usually Pi and the password either raspberry or whatever you might have changed it to. You may be asked to switch to SSL at this point – just follow the link it tells you to go to. You should see something like this:Ĭlick the Administration tab, then click Add Printer. Open up a web browser on your Pi and then navigate to 127.0.0.1:631. To do this, you need to navigate to the CUPS user interface. You now need to add your printer to your print server. Carry on as before! After that, you just need to add a printing administrator so that CUPS can manage printers on the Pi.
#AIRPLAY APP FOR MAC AIR PARROT INSTALL#
When that’s done, then run:Īgain, you’ll see apt wanting to install an assortment of packages. You’ll probably see apt asking to install a relatively large number of packages – don’t worry about this, just press Y and then Enter to continue.
#AIRPLAY APP FOR MAC AIR PARROT SOFTWARE#
If your printer doesn’t show, make sure it is turned on and functioning normally.Īt this point you can start installing the backbone software that will provide the printer networking. Once it has rebooted and you’re back at a desktop, run Terminal again and then run:Īll devices that are connected via USB should be listed at this point. Don’t panic about unplugging it from about PC that it was connected to before – it’ll be a wireless printer soon!Ĭonnect the printer to your Pi and reboot the Pi with the following command: If you’re currently connecting your printer via Ethernet or Wi-Fi, run straight to step 3. If you printer normally connects via USB, now would be a good time to connect it to your Pi’s USB port. Step 2: (If you’re connecting via USB) Connect your printer with its USB cable. Once that’s done, you can start installing your device. If there are any upgrades listed, type Y and press Enter to continue installing updates. Open up a VNC connection with your Pi and then open Terminal. This might seem like a no-brainer, but you’ll find yourself installing out of date software if you don’t keep your Pi’s sources up to date. Step 1: Ensure your Raspberry Pi is up to date. It doesn’t matter whether your printer connects via USB, Ethernet or Wi-Fi – this trick will still work. In any case, if you’ve got yourself a Raspberry Pi, have 20 minutes to spare and a tiny bit of experience with SSH, you can get your printer working natively in AirPrint in a flash! Got a printer kicking around that you wish had AirPrint? Maybe it’s one you’ve had for several years, or maybe it’s a cheaper one you recently picked up and wished it had support for your iPhone, iPad or iPod touch.
0 kommentar(er)
